Your Best Choice for Furnace Repair and Air Conditioner Repair in Howell MI (52)

Furnace tune up, filter replacement, humidifier service

Clean oil fired boiler system. Tune up, replace leaking relief valve.

Did a furnace tune up on a Lennox G43UF I checked the air filter and water panel, cleared all the hoses inside the furnace, visually inspected all wiring inside the furnace tested the ignitor, checked amp draws, cleaned the burners cleaned the flame sensor and cleaned and inspected the burner orifices. Ran a combustion analysis and this furnace is good to go

Aprilaire 600 humidifier install

Installation of a Lennox el296 furnace with a I-comfort wifi t-stat and a air cleaner and humidifier

Furnace tune up, air cleaner replacement, and humidifier pad.

Did a furnace tune up on a G61MPV and I cleared the condensate drain and all the hoses inside the furnace. Visually inspected all the wiring inside the furnace and cleaned the burners flame sensor and burner orifices checked the amp draws tested the ignitor, changed the air filter and water panel, checked the thermostat batteries and ran a combustion analysis and this furnace is good to go.

Did a furnace tune up on an Amana GUX070, checked the thermostat batteries, cleared the condensate drain and all hoses inside Ethernet furnace, tested the ignitor checked amp draws, visually inspected all wiring inside the furnace, cleaned the burners cleaned the flame sensor cleaned and inspected the burner orifices ran a combustion analysis and this furnace is good to go

Did a furnace tune up on an Amana GUIC090 I cleared the condensate drain checked the air filter and the wp, cleared all the hoses inside the furnace visually inspected all the wiring inside the furnace, cleaned the burners, cleaned the flame sensor, and cleaned and inspected the burner orifices, ran a combustion analysis and this furnace is good to go.

Did a furnace tune up on a Lennox G50 changed the air filter and wp cleared the condensate drain and all hoses inside the furnace, tested the ignitor and checked amp draws, cleaned the burners cleaned the flame sensor and cleaned and inspected the burner orifices, I ran a combustion analysis and this furnace is good to go.

Did a furnace tune up on an Amana GUIC070 and I cleared the condensate drain all the hoses inside the furnace. Visually inspected all the wiring inside the furnace tested the ignitor, checked the amp draws, cleaned the burners flame sensor and burner orifices, changed the air filter. Ran a combustion analysis and this furnace is good to go.

Repair thermo-pride oil furnace. Adjust electrodes and air shutter. Replace nozzle for proper combustion.

Did a furnace tune up on an Armstrong air G1N80 I cleaned he burners flame sensor and burner orifices, cleared all the hoses inside the furnace changed the thermostat batteries, air filter and humidifier pad, tested the ignitor, and checked the amp draws on the furnace, blower and inducer motors, ran a combustion analysis and this furnace is good to go.

Did a furnace tune up on a goodman GMS9, I changed the w.p. cleaned the burners, flame sensor, and burner orifices, cleared all the hoses inside the furnace, visually inspected all the wiring inside the furnace, checked the amp draw on unit, inducer and blower motors, tested the ignitor, ran a combustion analysis and this furnace is good to go

Carrier furnace tune-up.

Did a furnace tune up on a Lennox G50 I cleaned the burners flame sensor and burner orifices checked the amp draw on the blower and inducer motors tested the ignitor cleared all the hoses inside the furnace and the condensate drain, changes the air filter and thermostat batteries. Ran a combustion analysis and this furnace is good to go.

Did a furnace tune up on a Lennox G49, I changed the air filter cleared the condensate drain and all hoses inside the furnace visually inspected all wiring inside the furnace tested the ignitor checked the amp draw on the blower and inducer motors cleaned the burners, flame sensor and burner orifices ran a combustion analysis and this furnace is good to go

Did a furnace tune up on a SLP98 I cleaned the burners changed the air filter cleaned the flame sensor and burner orifices checked the amp draw on the blower and inducer motors cleared the condensate drain cleared all the hoses inside the furnace tested the ignitor. Ran a combustion analysis and this furnace is good to go

Did a furnace tune up on a Lennox SLP98 I cleaned the burners flame sensor and burner orifices change the air filter and water panel, tested the ignitor checked the amp draw on the blower and combustion motors, ran a combustion analysis and this furnace is good to go

Furnace tune up, Lennox furnace, air cleaner and humidifier panel replacement

Ran a utility tune up on a Bryant 340AA. I cleared the condensate drain cleared all the hoses inside the furnace visually inspected all wiring inside the furnace, checked the amp draw on the blower and inducer motors, tested the ignitor cleaned the burners, flame sensor and burner orifices ran a combustion test and this furnace is good to go.

Did a furnace tune up on a Lennox G60 I changed the thermostat batteries, cleaned the burners, flame sensor and burner orifices, changed the air filter and water panel cleared the condensate drain and all hoses inside the furnace ran a combustion analysis and this furnace is good to go!

Did a yearly tune up on a EL195 Lennox furnace, changed the thermostat batteries checked the air filter, changed the water panel cleared the condensate drain and all the hoses inside the furnace visually inspected all the wiring inside the furnace, tested the ignitor, cleaned the burners, flame sensor and the burner orifices. Ran a combustion analysis and this furnace is good to go!

Repair propane fired furnace. Tune up.

Bard oil furnace tune up and repair